Company logoHelp Center
Visit minetxc.com

Mini DOGE 3 Setup Guide

3 min. readlast update: 07.23.2025

           Mini DOGE 3 Setup Guide

Purpose: This guide provides step-by-step instructions for setting up and configuring the Mini DOGE 3 cryptocurrency miner.

1. Physical Setup

  • Placement: Position the miner near your network router or switch for the best connection using an Ethernet cable. Wi-Fi can be used if a wired connection is not feasible.

  • Connections:

    • Plug in the Ethernet/network cable (if using wired connection).

    • Attach the antenna if not already installed.

    • Connect the power supply to the miner and power it on.

2. Locate the Miner on Your Network

  • Using a device (computer or smartphone) connected to the same network and frequency band:

    1. Open a web browser (e.g., Google Chrome).

    2. Visit: find.goldshell.com

    3. Wait up to 6 minutes for the website to detect your miner’s IP address.

      • If the IP address does not display correctly, press the IP button on the miner and refresh the webpage.

    4. Click the Settings (gear) icon to access the miner’s dashboard.

           

Important: Record the miner’s IP address. You will need it for future access to the dashboard.

3. Unlock the Miner

  • On the dashboard, click Unlock in the top-right corner.

  • Enter the default password: 123456789

4. Change the Default Password

To enhance security:

  1. Navigate to the System tab after unlocking the miner.

  2. Enter the current password and your new desired password.

  3. Click Change to save your new credentials.

Tutorial-change pw.png

5. Configure Wi-Fi Settings (Optional)

If your miner supports Wi-Fi:

  • After connecting to a Wi-Fi network, verify the connection status in the Wi-Fi Settings section on the dashboard.

  • Follow manufacturer guidelines for enabling, configuring, or disabling Wi-Fi functionality.

Tutorial-network.png

6. Configure Mining Pool Settings

  1. Open the miner's dashboard in your web browser.

  2. Navigate to the Miner tab and select Pool Settings.

  3. Input the following pool configuration:

    • Mining Address:
      stratum+tcp://pool-do.texitcoin.org:3643

    • User Name:
      @Your Litecoin Wallet Address.Your TXC Cold Storage Coin ID
      (Example: @ltc2qrhz5ntn8cpswvd3rrxxd73zfd96wpwjqhrkk2h.mB3k9)

    • User Password:
      c4fxyayr5kxfevhrp (same for all users)

  4. Click SAVE at the bottom of the page.

7. Final Notes

  • Allow 5–10 minutes for the miner to connect and stabilize.

  • Monitor your miner’s performance via the mining pool’s website.

Was this article helpful?