ElphaPex DG Home 1 Miner Setup Guide (TEXITcoin + Litecoin)

What You'll Need Before You Start

Make sure you have the following:

A Litecoin (LTC) Receive Address -Your package will include a LTC wallet
This can be from a crypto exchange (e.g., Coinbase, Kraken, not a good idea) or a personal wallet (hot or cold, preferably a Cold Storage Coin).
Your TXC Cold Storage Coin ID
Provided by your TEXITcoin cold storage wallet, or available in your back office. Required to receive TXC mining rewards.

Step 1 Physical Setup

Placement: Position the miner near your network router or switch for the best connection using an Ethernet cable. Wi-Fi can be used if a wired connection is not feasible.
Connections:

Plug in the Ethernet/network cable (if using a wired connection).
Attach the antenna if not already installed.
Connect the power supply to the miner and power it on. Step

Step 2: Download Elphapex Tool

Go to: https://www.elphapex.com/support/download/
Download: Most recent ElphapexTool Release

Extract the folder and open the file called ElphapexTool.exe

Once it opens, click on the + symbol in the top left-hand of your screen

Add IP Range of 192.168.1.0 and 192.168.1.255 > click the + symbol

Then click Yes, and it will go to the next screen. Click Scan at the top. Once it finishes scanning, click ok, and give it a second, and you will have this screen

You need to make a note of what IP address is listed.

Double-click on the active IP address, or open your browser, and now enter that IP address you just noted and click Enter

Step 3: Configure the Miner

Open the miner’s web interface in your browser using the IP address provided
Enter Username: Root Password: Root
Go to the “Miner” tab
Enter the following mining pool settings:

Mining Address:
stratum+tcp://pool.texitcoin.org:3643
User Name:
Your Worker Identifier (Format: Username: WorkerID
User Password: You can choose any password you like

Click the SAVE button at the bottom of the page

Step 4: Reboot & Monitor

Click the Reboot button (bottom right)
Wait 60 seconds for the miner to restart
If needed, re-run the ElphaPexTool to locate the miner’s new IP address
Open the IP address in your browser again
Wait 5–10 minutes for the miner to start—once it’s working, all 4 circles at the top of the Dashboard will turn green

✅ You're Now Mining!

TEXITcoin (TXC) will be mined into the official pool
Litecoin (LTC) will be sent to your provided wallet address to help offset electricity costs